Fortigate Hardware Quick Inspection Package(HQIP)測試

Fortigate 可以Hardware Quick Inspection Package(HQIP)自我檢測硬體。
首先要到https://support.fortinet.com 去下載 HQIP Images。
需要輸入設備序號後會提供下載檔案，如：FGT_600D-HQIP.3.4.2.2190.OUT。

然後Fortigate console接好，開機。
出現"Press any key to display configuration menu..."時按任何按鍵中斷開機程序。
[C]:  Configure TFTP parameters.
[R]:  Review TFTP parameters.
[T]:  Initiate TFTP firmware transfer.
[F]:  Format boot device.
[B]:  Boot with backup firmware and set as default.
[I]:  System configuration and information.
[Q]:  Quit menu and continue to boot.

[H]:  Display this list of options.

Enter C,R,T,F,B,I,Q,or H:

Enter C,R,T,F,B,I,Q,or H:G

Enter remote TFTP server IP address [192.168.1.168]:192.168.1.100

Enter local IP address [192.168.1.64]:192.168.1.111

Enter firmware file name [FGT_600D-HQIP.3.4.2.2190.out]:FGT_600D-HQIP.3.4.2.2190.out

準備好TFTP SERVER上傳FGT_600D-HQIP.3.4.2.2190.out。

###################

Total 20883984 bytes data downloaded.

Verifying the integrity of the firmware image.

Total 65536kB unzipped.

Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?R

................................................................

Reading boot image 4698251 bytes.

Initializing firewall...

System is started.

Please press Enter to activate this console. 

FORTITEST/FGT6HD3916804672 ~# diag hqip start

打完diag hqip start就會開始檢測，建議開機前就把網路線插好，

如Port1 接 Port2、Port3 接 Port4。

最後就會顯示硬體自我檢測狀況。