Cisco Lightweight AP (thin ap)

設定： 

AP#capwap ap ip address <IP address> <subnet mask> 

AP#capwap ap ip default-gateway <IP-address> 

AP#capwap ap controller ip address <IP-address>

檢查:

AP#show capwap ip config  

遇到"ERROR!!! Command is disabled. "

1.斷掉有線網路的連線
2.ap#debug lwapp console cli 

3.ap#write erase

4.ap#reload

Cisco thin AP 如何加入controller可以參考：

Cisco 瘦AP加入Controller (Lightweight AP join the Controller) 

引用：

Resetting the LWAPP Configuration on a Lightweight AP (LAP) 

ERROR!!! Command is disabled.